Feeds:
Posts
Comments

Archive for the ‘Printables’ Category

A M Davis (London) Cut Out and Colour Farm Set

(Apologies for the poor quality photo. Mission: BUY A CAMERA THAT WORKS is in progress.)

There is something about the original set of cards for this farm set that baffles my scanner. The full-size prints looked all right, but all sorts of odd things happened when I tried to scan them back into the computer, or to resize the scanned images on screen.

Luckily, in our local newsagents, there is a photocopier that appears to be ancient and decrepit. It wheezes and rattles and hesitates and then produces photocopies on white-hot paper. More importantly, in this particular instance, it is so low-tech that it just copies things and does not do whatever it is that my scanner does.

I can’t honestly say that the photocopies it produced for me earlier this week are the cleanest I have ever seen, but they have made this blog post possible and I came home with a sheaf of paper and the feeling that things were now going to go well.

My scanner, however, being defeated in its attempts to thwart me, had evidently communicated with my printer, which promptly decided that it was about to run out of ink. (No, I don’t keep spare cartridges to hand. I am convinced that the minute I stock-pile some the printer will stop working altogether.) And this is why the test run that I printed, instead of being black and white, has a blue-violet tinge to it. Even taking the ink cartridges out and shaking them and re-inserting them did not help this time.

A M Davis (London) Farm Set to Cut Out and Colour

While I was coaxing the last sheet out of my printer My Nearest and Dearest (one of My Nearest and Dearest) conceived the idea that it would be rash to release a whole farm set into the unsuspecting universe as they might be copied and used to produce fakes.

I honestly can’t imagine why anyone would wish to do this, or that it could possibly be worth anyone’s while to do it. But, as the matter had been raised, I promised that I would make it as clear as I could that this is NOT a complete set and that there are only 8 cards reproduced in the pdf below (and there should be, as far as I know) 12 cards in total.

Anyway, to shorten what is turning into a long story, I used thin, cheap card for my example and was pleased at how well everything fitted together.

Ideally, if I make the full size set again, I think I will use 200gsm card. Then it would be possible to cut around the legs of the horse and in between the wheel spokes, without fear of them becoming too flimsy.

So now, without further ado, here is a pdf of the large size farm set: Paper_Model_Farm_AM_Davis_OHM20170601

And here is ‘dolls’ house size’ farm set (it isn’t 12th scale):
Miniature_Farm_AM_Davis_OHM20170601m
The positions of the folds and cuts can be seen in the pdf for the bigger version.

NB: These are for your personal use and enjoyment, please do not re-print them and sell them as modern, vintage or antique cards or card sets.

A M DAVIS farm and garden - colour

Photograph – but not taken by me

There is a pdf for the colour version (just the house and garden, as shown above):
OHM_Farm_and_Garden_20170524 and the basic instructions for putting it together are in a previous post here

Finally:

My Nearest and Dearest, having triumphed in the ‘What About Fakes?’ debate, and asked to be a Severe Critic and read this before I pressed the Publish Button, suggested that it might be a good idea to explain why I going to the bother of getting a decent print of this cut-out paper model, not to mention why am I making part of it available here.

The short answer is that I need a decent print for a project that I am working on.
And, having tried the full-size model out, I think it would be a pity for it to vanish back into my ‘Why Have You Got This and Can You Get Rid of It?’ box.
And I hope that if you enjoy paper models you will have fun with it too.

 

Advertisements

Read Full Post »

2017 !  How did it get to be 2017 ?
I didn’t think it had been that long since I wrote something for this blog.

There should be a nice photograph here. But I don’t have a camera at the moment and the results that I got from the Android Tablet that I borrowed were a bit… odd…

So you are going to have to take my word for it that the images below are of a really a rather nice little model farmhouse sitting in its own garden, and propped up at a peculiar angle either on the cap of a tube of toothpaste or a cork.
open_house_miniatures_Card_farm_house_put_together  open_house_miniatures_card_farm_house_put_together-size

The farmhouse is something that I was trying out today and, while I was struggling with a knife blade that wanted to break and paper that wanted to tear, not to mention disbelieving the way the card I was using absorbed water-based glue like a sponge and went soggy, I thought that, as well as being relatively simple to make (just don’t use the card I tried using first of all), the finished farmhouse would look good in a miniature nursery, school-room or shop.

And so here, if you would like to try making this for yourself, is a pdf of the parts for you to play with too:
OHM_Farm_and_Garden_20170524
UPDATE: 3rd June 2017 – black and white versions of an 8 card set are now in this post

The usual request remains the same: make the model, share it and, if you want to, sell the finished article (but think of all the other people who will do this too), but please don’t re-sell the pdf or the artwork itself.

Instructions for putting the model together:
The paper or card that you use and your printer ink will affect the finish and the colours you get. 
If you have never made anything this small before and would like to see detailed, step by step pictures for a similar project, please take a look here at another small house on a base – the walkthrough is towards the end of the post (which is much shorter than this one!)

Materials:
I used 200gsm paper and water-based glue, which I applied with a brush.
This was mainly for speed, as this was a trial run for me.
Printing on a thin paper and gluing this to thin card would work equally as well.
The main thing is that you need something that will hold its shape when folded and will not fall apart when glued.
Note: If you glue 2 sheets of paper, or paper and card together, make sure they are completely dry before cutting them out.

First (for reference only) look at the picture below:
The fold lines are marked in red and the slots that need to be cut out are marked in blue.
These lines are fine and black on the pdf and, if you don’t know what you are looking for, they are easy to miss.

Reference picture for A M Davis farmhouse and Garden Kit

What I did:
Scored along the fold lines first. 
Then cut the slots out, cutting away from the corners.
Then cut around the outlines.
Then made the creases in the various parts – centre roof, house walls, etc.

I found that it was best to fit the front of the house into the roof first and then fit the back to these two pieces once they were assembled. A little bit of glue inside the house, applied with a paintbrush, will hold all the parts together.

The hedges fit around the outside of the garden base.
A small amount of glue, applied with a paintbrush, and left to dry on the thin edge of the garden base is helpful. Once this is dry, another thin layer of glue can be applied and the hedges should adhere to this without giving too much trouble.

I assembled the garden so that the coloured part of the hedge was on the inside and, when it was all in I place, I discovered that there was a significant gap between the front hedge and the garden base.

So, after I had glued the house to the back and the base and was certain that everything was dry and fairly stable, I made a second base out of two layers of card.
I measured and cut this to be a little bit wider than the original base. The new, slightly larger, base makes a tiny ledge around the sides and also strengthens and neatens the appearance of the whole thing.

The white, unprinted card and the cut edges now looked a bit stark to me, so I washed some thin water-based paint over them – green for the base and the outside of the hedges and light orange for the chimneys.

I am sorry that I do not have the means of taking better photos at the moment – this is a nice little model and deserves a better picture than I can achieve right now.

A Minor Point :
The original cards are about A5 in size. This would be very small if reduced to 12th scale, so this model is not 12th scale, just a useful sort of size for a dolls’ house.

About the Cards :
There are 12 cards in the set that I have. They were published by A M Davis, Quality Cards & Co (London).

.A M Davis - Quality Cards Logo

The original cards are uncoloured line drawings. I made copies and coloured some of those. (This was a lengthy process as they were probably lithographed and the interference dot-matrix pattern, or whatever it is, is appalling. It would have been quicker to draw my own design out.)
The set is undated and I have no information about the original publisher.
A quick look on the internet did not  make me much better informed about them, but I did find two enjoyable sites, which are worth a look if you are interested in vintage cards:

http://www.postcardy.com/article04.html

http://vintagerecycling.blogspot.co.uk/2014/04/am-davis-quality-cards.html

If you are interested in making paper based projects like this one there are a few more available on this page

Finally:
I have always said my photographs are awful, but this has to be a new low point.

open_house_miniatures_dollshouse_farm_and_garden_a_m_davis_original

Read Full Post »

open-house-miniatures-glitter-christmas-trees

These date from a time when I was trying to fit many Christmas decorations into a very small space.

open-house-miniatures-slot-together-christmas-tree

  • Glue two sheets of thin card (140gsm each) together
  • Glue the paper pattern (photocopy paper, probably 80gsm) to the card
  • Place under a flat,heavy weight and allow to dry completely before cutting out
  • Cut out slot first
  • Then cut out tree (cut away from the inner corners towards the outer edge)
  • The raised surface at the cut edge may be removed by burnishing with the back of a metal tea spoon
  • Test fit and make adjustments

Decorating is a matter of choice. I did all of the following:

  • Paint
  • Allow to dry completely
  • Glitter (this is the fun but messy bit)
  • Allow to dry completely

I ran out of time, daylight and ideas when it came to photographing the finished trees, which is a pity because I like them and think that they cast pretty shadows.

 

open-house-miniatures-leave-the-fancy-photography-to-the-experts

open-house-miniatures-christmas-tree-pattern

I don’t know what size the above pattern will be when viewed / printed on another computer / printer, but the trees in the pdf below should print at 1 inch (2.5 cm) tall, which is the size of the examples I made.

OHM_011215_1_inch_Christmas_tree

 

Read Full Post »

The Not Very Encouraging News

  1. My camera is not working reliably
  2. My little home printer is not working at all

Result: no paper projects to do on this blog until above are fixed or replaced

The Good News

  1. The scanner part of my printer is working. (I am not saying that it does a wonderful job, but at least it is working)

The “Oh no, what now…” News

Due to building work at home, alot of my things have been in store.

While in store, some things evidently became damp (see foxing on scan of card below)

example of foxing due to damp

Foxing (the brown spots) is the result of a type of mould and I have to go through everything and check / air / scan / throw away / make tough decisions about it.

While doing this, I thought that I should make the effort to digitize my paper-based archive. [Archive, in this case = a very grand word for a box of postcards, scraps and other miscellaneous junk.]

However, I have so much to do (in general) at the moment that I cannot – must not – spend more than 1 hour a day sitting in front of my computer.

Despite this, in an unwise(?) but praiseworthy(?) attempt to share what I thought might be useful to other people interested in making miniature things, I created a page called Printables on this blog.

I then came swiftly to the conclusion that:

  1. My idea of what is “useful” may not be universally “useful”
  2. I will soon run out of storage space, if I add full size images randomly
  3. Looking through lots of thumbnail sized images on a computer screen is tedious

Result: a suggestion that is going to end in disappointment for some people.

The suggestion is this:

There should be a comments box on this page and, if you would like to, you can leave a message there letting me know what would be useful to you. Please be as specific as you can, for example magazines is good, but magazines (fashion, 1950s) would be even better.

This would be a great help to me, as I could spend more time scanning and less time uploading (not at all useful) images here.

A couple of things to bear in mind, please:

  1. My 1 Hour a Day Computer Rule
  2. There are only 24 hours in a day and I do my best to be asleep for at least 6 of them

Finally:

Below is the result of one hour’s work. Most of the time was taken up by typing the descriptions and double checking that the right description was with the right card and how they were displayed on screen etc., etc., etc. This means that any scans I upload here are not going to have detailed written descriptions.

And I can’t decide if the following should be called: “cigarette cards“, “lithographic prints” or “possible miniature theatre scenery“, so please don’t be surprised if images are not classified as you think they should be.

No. 2 of 25 Reproductions of Celebrated Oil Paintings -

No. 2 of 25 Reproductions of Celebrated Oil Paintings
“Dutch Boats off Flushing”
De Reszke Cigarettes – J Millhoff & Co Ltd.

Cigarette Cards No. 20 (of 80) in the series Evolution of the British Navy - no manufacturer name given.

No. 20 (of 80) in the series Evolution of the British Navy
– no manufacturer name given.

Cigarette card - No. 19 (of 25)

No. 19 (of 25) Reproductions of Celebrated Oil Paintings
“Dutch Boats in a Calm”
Army Club Cigarettes – Cavanders Ltd

Cigarette Card - No. 3 (of 25) Reproductions of Celebrated Oil Paintings

No. 3 (of 25) Reproductions of Celebrated Oil Paintings
Dedham Mill
Army Club Cigarettes – Cavanders Ltd

Cigarette Card - No. 12 (of 25) Reproductions of Celebrated Oil Paintings

No. 12 (of 25) Reproductions of Celebrated Oil Paintings
“The Valley of the Llugwy”
Army Club Cigarettes – Cavanders Ltd

No. 7 (of 25) Reproductions of Celebrated Oil Paintings

No. 7 (of 25) Reproductions of Celebrated Oil Paintings
The Stream
Army Club Cigarettes – Cavanders Ltd

 

* * *

Afterword

I don’t sponsor any advertisements on this blog

WordPress need to make money in order to run their blogging service and so they sell advertising space.

I could, by paying WordPress a small fee, make this blog advert free – nice as this would be, it’s not going to happen soon.

Read Full Post »

paper model kiosk - paper nativity download - free

This is going to sound rushed, because I am supposed to be doing something else this morning, but I saw this and I thought it was too good to miss.

crechemania - paper model kiosk - excellent quality - free nativity download

Paper Model Kiosk (aka Crechemania) have a very large collection of downloadable paper nativities on their entrancing, enthralling, amazing website. Some of them, like the miniature example above are free. (Miniature in this case = 3 x 1.5 x 3.5 inches)

The downloads page for all their nativity sets is here.

To use the site and receive a download, you need to register your email address.

When you ask for a free (I MUST NOT, (cannot) buy them all, although I want to) download, a link that is live for one hour is sent to your email address. By clicking on the link in the email, you are re-directed to the Crechemania website and can then download a pdf of your selected nativity.

I have just tried this out and encountered one minor problem – the registration part of Paper Model Kiosk’s site did not work smoothly for me in Firefox. It was, however, fine in Google.

I am going to repeat the Crechemania Free Download Service agreement here :-

By using this Crechemania Free Download Service I agree with the Crechemania.com download policy; that these downloads are copyrighted material; that they are for my personal use only. I may download as many items as I wish; as many times as I wish; print as many as I wish; assemble as many as I wish; give away as many as I wish. But I may not sell them; offer them for sale on Internet sites; post these as Downloads on my Web site; or mailing lists; and I agree to the receipt of Crèchemania.com email notices and newsletters about crèche downloads, news, and information; and I understand that I may receive periodic emails notifying me of Chrèchemania news and updates.

Afterword

Any advertisements that you see on this on this blog page, are not mine.

WordPress has to fund this “free” weblog service somehow and so they sell advertising space to third parties

I could, by paying WordPress a small amount of money, stop the adverts appearing here.

I haven’t done this – and considering that I could buy a couple of nativities for the same money, can you blame me?

Read Full Post »

Open House Miniatures - Victorian Advertising

I came across some advertisements at the back of a Victorian book of fairy stories and loved the fabulous use of different lettering.

There are eight (in miniature) on this pdf –

OHM_140921_victorian_bw

and they should each print at about 2 by 3 inches in size.

In the test run that I did, I printed them very quickly on thinish, poorish quality, A4 printer paper and was very pleased with the results (although, as usual, not with the photographs of the results !)

I realised how out of practice I was at working with a computer when I didn’t manage to get them lined up, or even the right way up on my first attempt. (I have been, and am still, busy, busy, busy, but that is a story for another time.)

Open House Miniatures - Victorian Advertising - misaligned

Here are a few more on a larger scale, so that you can resize them to suit yourself. (Click on the pictures to see them full size).

I hope that they will be useful and fun to use.

Open House Miniatures - Victorian advertising Open House Miniatures - Victorian advertising Open House Miniatures - Victorian advertising Open House Miniatures - Victorian advertising

Afterword

I don’t host any advertising on this weblog.

If you see adverts then they were put there by WordPress, who have to make money in order to maintain this blog site.

By paying WordPress a small yearly fee I could arrange for there to be no advertisements on this weblog. I am too mean / poor to do this.

Read Full Post »

Nativity 2013

open house miniature christmas nativity 2013

I made these nativity sets last March and have been trying to get a “nice” photo of a finished one ever since.

So far the best I have come up with has been rather blurred…

open house miniature nativity set christmas 2013

The best that I can hope for, therefore, is that the combination of the above two photos will give some idea of the finished article…

The nativity started life as an old Christmas scrap

I have no idea who this will print - I suspect that although it is relatively large it is also poor quality

I have no idea how this will print –
I suspect that although it is relatively large
it is also poor quality

If you would like to make this miniature nativity for yourself, the pdf is here –

nativity_scene_christmas_OHM2013

If you decide to print and make the nativity, please bear in mind that your computer / printer settings and the paper that you use will make difference to the results that you get.

A walk-through of how I made mine is here –

There are more things to make and do on the projects page and I am going to repeat here what I say there –

  • You may use the contents of the pdf for yourself – and if you would like to make 10 of something and try selling them please go ahead, but do think first of all the other people who will be doing exactly the same thing.
  • You may share these projects with your friends and family, and miniature club.
  • You may link to them from your website / blog / satellite station, if you have one
  • You may customise them.
  • You may use them / the design ideas, in whole, or in part, as for inspiration for making your own things.

You may not copy the pdf, or the contents of the pdf, in whole, or in part, and re-sell them.

This is my 101st post !

Happy New Year,!
I hope that 2014 will be a good year for you all.

Read Full Post »

« Newer Posts - Older Posts »

%d bloggers like this: